Fence guide

How to measure for a fence

A rough measurement is all you need for an instant estimate. It takes about ten minutes.

Get a Free EstimateQuick Quote

What you need

  • A measuring tape or wheel, or just count your steps. One normal step is roughly 2 to 3 feet.
  • Your survey, if you have it. Many show the length of each property line.

Step by step

  • Walk the fence line where the fence will actually go, usually starting at the back corner of the house.
  • Measure each side and write it down: left side, back, right side.
  • Add them up. That total is your linear feet.
  • Count your gates: walk gates, double drive gates and wide gates for a boat or RV. Note how wide each needs to be.
  • Note anything unusual: slopes, big trees and roots, a pool, an old fence to remove.

Tips

  • Do not subtract gate widths. We account for them.
  • If your fence will tie into a neighbor's fence, measure to that point.
  • Photos of the fence line help a lot. You can add up to 6 photos to your estimate request.

Get your number

Put your total feet and gates into our estimator for a range. Your final price comes after a free on-site measure.

Quick answers

How do I figure out how many feet of fence I need?

Measure each side where the fence will go and add them up. That total is your linear feet.

Should I subtract the gate width from my fence length?

No. Give us the full length and your gates. We account for the gates.

☎ Call NowFree Estimate